The customer's raw liquid is textile cleaning water. The volume of liquid to be treated every day is 8 cubic meters, and the customer needs to work for 7 hours every day. The solid components therein are mainly oil and sulfate, with a solid volume content of 15%.
Based on the customer's process requirements, the following configuration was selected after a comprehensive assessment:
Machine: Chamber filter press
Filtration area: 20 square meters
Filter chamber volume: 300L
The material of the filter press frame is carbon steel welded with corrosion-resistant coating
Core functions: High-efficiency filtration, convenient operation and maintenance, effectively reducing the moisture content of the filter cake.
This solution highly meets the customer's requirements. A chamber filter press is selected, which is suitable for solid-liquid separation and can effectively separate the solids from the clean water of textiles. A solid content of 15% is considered medium to high concentration, and the filtration area of the chamber filter press has a high degree of matching with the processing capacity. Take the 630 model as an example. If the single filtration area is 20 square meters and it processes 8 cubic meters of sewage, the single filtration cycle is approximately 1 to 2 hours (depending on the pressure and the thickness of the filter cake), which can meet the daily production rhythm. For 8 cubic meters of textile cleaning water containing 15% oil and sulfate, the 630 chamber filter press has become a highly adaptable choice due to its comprehensive advantages such as structural sealing, material corrosion resistance, treatment efficiency and cost control. Its core value lies in: achieving efficient solid-liquid separation through high-pressure extrusion, while solving the treatment difficulties of oil and sulfate with anti-adhesion and anti-corrosion design, meeting the multiple demands of environmental protection, safety and economy in industrial production.
Basic parameters
|
Filtration area |
20M2 |
Filter chamber volume |
300L |
|
Filter cake thickness |
30mm |
|
Main material |
Carbon steel welding, corrosion-resistant coating |
|
Filter plate material |
Reinforced pp |
|
Filter plate size |
700*700 |
|
Feeding method |
Central feeding |
|
Unloading method |
Manual pulling plate |
|
Filter plate pressing method |
Automatic hydraulic |
Junyi Copyright © 2025 ALL rights reserved